NEC UNIVERGE SV9100 Manual page 146

146
3. SPK (or hang up at SLT) if you dialled 888 in step 1.
Your Call Forwarding (Station) Programmable Function Key goes out.
Camp On
With Camp On, an extension user may call a busy extension and wait in line (Camp-On) without hanging
up.
The call goes through when the busy extension becomes free. Camp On helps extension users to get
through as soon as a busy extension becomes free. It also lets callers wait in line for a busy extension
without being forgotten.
When you have set Camp-On you can choose to wait off hook or go on hook. If you go on hook your phone
will ring when the extension becomes free.
With a networked system, camping on to an idle extension and Trunk Queuing/Camp On for a trunk port
are not supported.
With a networked system, when Camp On is enabled, there is a slight difference in the telephone's
display. With a single system, the target extension's name is displayed on the phone which has enabled
Call Waiting. With a networked system, the extension number is displayed.
Operation
To Camp-On to a busy extension:
1. Call busy extension.
1. Dial Camp-On service code 850
OR
2. Press Camp-On key (SC 851: 35).
3. You can choose to hang up or not.
To cancel a Camp-On request:
1. Hang up.
2. At system phone, press Speaker and dial 870.
OR
At system phone, press Camp-On key (SC 851: 35).
OR
At single line set, lift handset and dial 870.
Caller ID Display
Caller ID information can be sent to the target extension in a networked system and show the Caller ID on
the phone's display. The Abbreviated Dial Name is also shown on LCD by searching Abbreviated Dial
Table at the target system.
Operation
A DDI call routed directly to a remote extension will send the Caller ID information to the remote system.
The DDI name set in the system programming is also sent to the remote system.
At the remote system the Caller ID information will be displayed or, if the Caller ID number matches an
Abbreviated Dial entry the Abbreviated Dial name will be displayed.
A trunk call that is first answered and then transferred to a remote extension will display the Caller ID
number and the DDI name. The Abbreviated Dial name will NOT be displayed.
Central Office Calls, Placing: Seizing a trunk in a networked system
The system allows a user to seize a trunk in a networked system using the following methods:
Trunk Route Access (Dial trunk access code).
F-Route (F-Route seizes a trunk at another system).
The following are not available:
Specified Trunk Access (805 + trunk number).