NEC UNIVERGE SV9100 Manual page 245

System Availability
Terminal Type:
All Stations
REQUIRED COMPONENTS:
VM8000 InMail
GPZ-IPLE
Operating Procedures
To access voice mail from a Multiline Telephone in the Main system:
1. Lift the handset or press Speaker.
2. Dial pilot number for voice mail.
3. When voice mail answers use soft keys to navigate.
- OR -
4. Wait for soft keys to time out and listen to voice prompts to navigate.
5. When finished hang up.
To access voice mail from a Multiline Telephone in the Remote system:
1. Lift the handset or press Speaker.
2. Dial extension number for voice mail.
3. When voice mail answers listen to voice prompts to navigate.
4. When finished hang up.
To program a One-Touch/Feature Access key for easy message access:
1. Press Speaker.
2. Dial 851.
3. Press One-Touch/Feature Access key.
4. Dial 77 followed by Mailbox number.
5. Press Hold.
Service Conditions
General:
Any station or Call Arrival (CAR) key can be set for Call Forwarding – Busy/No Answer to voice
mail.
The following features are supported for voice mail users in remote systems:
Message Waiting Indication
Automated Attendant
Auto Login
Call Forward – Busy/No Answer to voice mail
Call Forward – All Call to voice mail
A voice mail with at least eight ports should be used in any K-CCIS system with a shared
voice mail.
InMail is supported for centralised voice mail in a NetLink and KTS to KTS CCIS network.
A maximum of 16 VM8000 InMail ports are supported.
When InMail is used as centralised voice mail in a KTS to KTS CCIS system, remote
mailbox users cannot access End User Web Pro for telephone and InMail configuration.
Restrictions:
In the voice mail, only release transfer type is supported for mail boxes of stations in
Remote systems.
In a KTS to KTS Network, only digital voice mails are supported for K-CCIS.
In a KTS to KTS network, Centralised Voice Mail is supported only via closed numbering
plan and only up to 7-digit station numbers.
center
Part 2: VoIP Manual 245