NEC UNIVERGE SV9100 Manual page 157

the router using NAPT Router IP Address on either of the pages below depending on the mode being
used.
Networking Mode - Easy Edit
Mode/SIP Profile x - Server Setup (PRG10-12-07,10-29-21)
Carrier Mode (IP Address) - Easy Edit
Carrier Mode (IP Address)/SIP Profile x - Server Setup (PRG10-12-07,10-29-21)
Carrier Mode (Domain Name) - Easy Edit
Carrier Mode (Domain Name)/SIP Profile x - Server Setup (PRG10-12-07,10-29-21)
Port forwarding will also be required in the customer's router.
Forward the SIP Signalling port (default UDP/5060) to the GPZ-IPLE IP address.
Forward the RTP port range (default UDP/10020 -> 10275 (depending on GPZ-IPLE size)) to the VoIP
Gateway IP addresses.
Port Forwarding Example (Default Settings)
Port Number (UDP)
5060
10020 – 10532
SIP Multi Carrier Support
The SV9100 can now be configured with up to six SIP profiles so that a single
system can be used to connect to both an external SIP carrier (ITSP), and at the
same time use a System Interconnection to another SIP compatible PBX such as
an SV8100 system. Alternatively a single system could be configured to connect
to multiple external SIP carriers if required for redundancy.
Conditions
– Advanced Items/VoIP/SIP Networking/Profile x/SIP Profile x - Networking
– Advanced Items/VoIP/SIP Networking/Profile x/SIP Profile x -
– Advanced Items/VoIP/SIP Networking/Profile x/SIP Profile x -
(PRG84-26)
Destination IP Address (GPZ-IPLE)
172.16.0.10
172.16.0.20
Part 2: VoIP Manual
(PRG10-12-09)
Description (GPZ-IPLE)
GPZ-IPLE (Signalling)
VoIP Gateway (RTP)
157