K-Ccis Features - NEC UNIVERGE SV9100 Manual

Licensing
Each SV9100 needs to be licensed to use IP Trunks for K-CCIS. One license gives that system the ability to
use one IP Trunk. Each K-CCIS node requires the relevant number of IP Trunk licenses.
K-CCIS IP Trunk Availability/Licensing Limitation
There is a limitation when configuring K-CCIS Trunk Availability that the correct number of system port
licenses must be free and available on the SV9100.
For example a default system is configured without any additional port licenses. This means it can
support up to 64 TDM ports.
If 60 TDM ports were in use on the SV9100 and you tried to assign 12 KCCIS over IP ports, the system
reports Invalid Data and will not assign the K-CCIS IP trunks.
To resolve this you must either remove some used TDM ports from the system or enable the system
free license (if available) and re-try assigning the K-CCIS IP trunks. In this scenario you can assign the
ports ok.
Up to 200 IP Trunk licenses can be added. Licence Code:
2.6.4.1

K-CCIS Features

K-CCIS Features
The following system features are available between systems that are networked using K-CCIS.
Features Available via K-CCIS
Automatic Recall
Brokerage Hotline
Call Back (R5)
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
Call Park Retrieve
Call Transfer – All Calls
Calling Name Display
Calling Number Display
Calling Party Number Presentation from Station
Centralised BLF
Centralised Day/Night Mode Change
Centralised E911
Dial Access to Attendant
Direct Inward Dialling
Part 2: VoIP Manual
BE114066
189