NEC UNIVERGE SV9100 Manual page 201

Operating Procedures
Using a Multiline Terminal with a call in progress (Closed Numbering Plan):
1. Press Transfer, and internal dial tone is heard. The call is placed on Common Hold.
2. Dial the distant K-CCIS station number where the call is to be transferred.
3. Wait for the ringback tone.
4. Hang up.
- OR -
1. When the party answers, announce the transfer.
2. Restore the handset (transfer is completed).
1. Using a Multiline Terminal with a call in progress (Open Numbering Plan):
2. Press Transfer, and receive internal dial tone. The call is placed on Common Hold.
3. Dial the trunk Access Code.
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number where the call is to be transferred.
6. Wait for the ringback tone.
7. Hang up.
- OR -
1. When the party answers, announce the transfer.
2. Restore the handset (transfer is completed).
Service Conditions
General:
A UNIVERGE SV9100 station can receive a K-CCIS transferred call as a camp-on call if allowed by
Class of Service.
Restrictions:
Trunk-to-Trunk Transfer must be allowed in Program 14-01-13 (Trunk-to-Trunk Transfer Yes/No
Selection).
A blind transfer across a K-CCIS link cannot be completed until ringback tone is received at the
transferring station.
Related Feature List
Link Reconnect – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.
Part 2: VoIP Manual 201