K-Ccis - NEC UNIVERGE SV9100 Manual

184
01
The following extra programming allows the dialling extension to send its own extension number as CLI to
the remote system.
System A
10-29-
14
number as the Calling
21-19
Party Number against
The following extra programming allows the incoming CLI from a remote system to be converted to name
which will be displayed on the called party's display.
System A
13-04
along with the remote
The following extra programming changes the Codec which is used between systems.
System A
84-13- Choose from – G.711,
28 G.722, G.726, G.729
The following extra programming enables DTMF Relay (RFC2833).
System A
84-34- Profile 1, SIP Trunk =
01
2.6.4

K-CCIS

K-CCIS
IP trunk connections over CCIS Networking via IP are used to connect multiple systems together over a
Data Communication IP Network (Intranet). Key-Common Channel Interoffice Signalling (K-CCIS) is used
to provide telephony services between the SV9100 and another SV9100 or SV8100.
The SV9100 uses the NEC proprietary CCIS Peer to Peer protocol over IP to communicate between
systems.
An GPZ-IPLE daughter board is required for connections between IP terminals and IP trunks. A maximum
of one GPZ-IPLE daughter board can be accommodated per system with a maximum of 128 DSP
Carrier B
10-29-14
Enter the extension
each extension.
Enter the remote
extension numbers
users name
84-13-28
RFC2833
System B
Carrier B
Enter the extension
number as the Calling
21-19
Party Number against
each extension.
System B
Enter the remote
extension numbers
13-04
along with the remote
users name
System B
Choose from – G.711,
G.722, G.726, G.729
System B
84-13- Profile 1, SIP Trunk =
32 RFC2833
System C
Carrier B
10-29-14
Enter the extension
number as the Calling
21-19
Party Number against
each extension.
System C
Enter the remote
extension numbers
13-04
along with the remote
users name
System C
Choose from – G.711,
84-13-28
G.722, G.726, G.729
System C
Profile 1, SIP Trunk =
84-13-32
RFC2833