NEC UNIVERGE SV9100 Manual page 64

64
Select the GCD-CP10 slot for the standalone system. If Netlink is used then the Primary GCD-CP10
and Secondary GCD-CP10(s) will require VoIP channels allocated depending on the number of IP
devices used at each node. This is flexible but most likely will match the number of IP devices used
at each node.
Code - This is the VoIP channel license code and is always entered as 5103.
(PRG 10-54)
Quantity - The quantity of VoIP channels to allocate to this systems IPLE card. The maximum
number you should enter is 248 because this with the 8 free VoIP channels will give you the
maximum card capacity of 256.
Example Usage
This example demonstrates how to increase the VoIP channels allocated from 8 to 108 when
additional IP licenses have been installed.
SV9100 system has the following IP licenses installed.