NEC UNIVERGE SV9100 Manual page 144

144
1. Press Speaker (or lift handset) + Dial 888.
Also allowed are 848 (Call Forward Immediate), 843 (Call Forward Busy), 845 (Call Forward No Answer,
844 (Call Forward, Busy/No Answer, or 842 (Call Forward Both Ring).
OR
Press Call Forwarding key (SC 851: code 16).
2. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation (then skip to step 4 - refer also to "Voice Mail").
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate with simultaneous ringing (not for Voice Mail)
0 = Cancel
3. Dial destination extension, Voice Mail master number or press Voice Mail key.
4. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
When you enable Call Forwarding, your Call Forwarding key flashes slowly. If you don't have a Call
Forwarding key, DND flashes slowly.
OR
1. Press Call Forwarding key.
SC 851: code 10 for Forward All Calls Immediately
SC 851: code 11 for Forward when Busy
SC 851: code 12 for Forward when Unanswered
SC 851: code 13 for Forward Busy/No Answer
SC 851: code 14 for Forward with Both Ringing
SC 851: code 15 for Follow Me
SC 851: code 16 for Forward to Station (forward type is selected at the time the option is set by the user)
SC 851: code 17 for Forward to Device
2. Dial 1 plus extension to enable; dial 0 to disable.
Once you activate Call Forwarding, only your Call Forwarding destination can place an Intercom call to you.
3. Dial destination extension, Voice Mail master number or press Voice Mail key.
You'll hear stutter dial tone when placing a new call.
Call Forwarding / Do Not Disturb Override
The extension user may be able to call an extension which has Call Forwarding or Do Not Disturb set.
Operation
To override an extension's Call Forwarding or Do Not Disturb:
1. Call the forwarded or DND extension.
2. Dial Call Forward / DND Override service code 807
OR
3. Press Override key (SC 851: 37).
Call Forward, Off-Premise
Off-Premise Call Forwarding allows an extension user to forward their calls to an off-site location.
This feature works the same in a networked system as it does in a single system.
A call to an extension at a remote system will forward to the Abbreviated Dial bin using a trunk at the remote
system.