Table of Contents
Advertisement
5-9
Fs Shift Select
The -Fs Shift Select feature meets the pull down and pull up
requirements in specific NTSC environments.
Without the RM-D800
eatetad
¥:
1 Hold down the DISPLAY key and press the down (¥) key.
[ |
[]
The tape time code display mode is activated, as confirmed by the
TC indicator being lit.
mT
2 Hold down the up (A) key and press the Fs key to enable the Fs
('
Shift Select function.
3 Select the desired optional mode by means of the up and down
keys.
The display will change as follows:
PULL OFF
A
Vv
PUL UP. dF (pull up drop frame)
A
Vv
PUL UP. nd (pull up non drop)
A
Vv
PUL dN. (pull down)
With the RM-D800
MENU
1 Press MENU to access the Fs Shift Select menu.
cal
The screen will look like this:
Fs Shift
Off
2 Select the desired optional mode by means of the + (plus) and -
(minus) keys.
r
OFF
[]
td
Pull Down
T
J
Pull Up Non Drop
T
J
Pull Up Drop
Chapter 5 Operation
5-37
crapr HHI
Advertisement
Table of Contents
