Table of Contents
Advertisement
chapter
Function Reset Menu
Resetting the function parameters
Function Reset
OK ?
2 Press ENTER.
The following settings for the machine 1 to 6 under control are
reset to their factory preset values at once:
Machine 2 Offset, Delay Time, Pitch Control, Locate Preroll
and Display Time.
To cancel resetting
Press ESCAPE.
You will then go back to the RM-D800 screen.
Clearing all cue points in memory
1 Press SHIFT + MENU
at the Function Reset screen above.
The display will change to look like this:
Memory All Clear
OK ?
2 Press ENTER.
Every cue point stored in memories 00 to 99 for the machines 1 to
6 under control is cleared.
To cancel clearing
Press ESCAPE.
You will go back to the RM-D800 screen.
To go back to the Function Reset menu
Press SHIFT and MENU again.
6-24.
Chapter 6 Operation Using the RM-D800 as Stave (with the DABK-801)
Advertisement
Table of Contents
