Table of Contents
Advertisement
MACHINE
MENU
(J
-
+
ES
CHASE
7 Press MACHINE again.
The LOCATE TIME display will read "Select" as before.
8 Press 1 on the keypad to select, this time, the source machine
which must have been ID-numbered "0."
9 Press MENU to display "Output Timing" menu.
1 0 Press either + or - to change the "Analog" to "Digital."
11 check to see that the REC FUNCTION 1-8 and TC REC keys are
all off.
1 2 Press CHASE.
The LOCATE TIME display will read "CHASE" to show sync
mode is entered.
1 3 Select the target machine again by pressing its machine number on
the keypad as you did in step 2.
The number pressed will start flashing in the LOCK STATUS
window.
1 4 Hold RECORD and press PLAY on the remote, which causes the
source machine to start playing and at the same time the target
machine to start recording.
Chapter 5 Operation
5-29
Chap 1H II
Advertisement
Table of Contents
