Relative Reference Time Indication - Sony PCM-800 Operation Manual

crepe lll
6-12
6-6 Relative Reference Time Indication
MENU
MENU
1 Press MENU until the LCD screen reads :
2 Press the +/- key.
"Relative Mode" will appear in place of "Absolute Mode."
4 Press STR, then press 0 twice on the keypad.
"00" will appear in the MEMORY NO. window.
To locate the tape to your reference point
Press RCL, and press 0 twice to specify MEMORY NO. 00. The
LOCATE TIME display will read 00.00.00.00. Then press LOC.
If a Locate Preroll time has been entered, the tape will be located to a
point that time before your reference point.
To set a new reference point
Repeat the above procedure. Each time a new reference point is stored
into memory, the previous memory is erased.
To switch the display back to Absolute time indication
mode
Press MENU until the LCD screen reads:
Display Time
Absolute
Then press the +/- key to show "Absolute".
Chapter 6 Operation Using the RM-D800 Remote Control Unit