Table of Contents
Advertisement
MENU
a
You can move the cursor to the right of the subframe first digit by
means of the SHIFT and +/— keys. Then if you hoid down the +/— key,
the subframe numbers will increment fast. The same will occur to the
frame, minute, and hour numbers if you continue to hold down the
key.
To enter +12:00:00:00.00 (maximum offset time):
You cannot enter with the + and — keys. Use the numeric keys instead.
When the numbers show in the LOCATE TIME window, hold SHIFT
and press ENTER.
If the slave and master are syncing : The slave will directly be offset
and synchronized keeping the offset time distance with respect to the
master.
If CHASE has not been pressed yet: Press CHASE.
To disable the sync offset
Without the RM-D800
When the display is in its OFFSET mode, hold the W or A key and
press the other, "00:00:00:00.00" will appear in the display. Until you
reset the offset display, the slave remains being offset.
With the RM-D800
T/C Offset
+ 00:00:00:00.00_
At the "T/C : Offset" menu, hold the + or — key and press the other.
The offset display is reset to "00:00:00:00.00" Note, there is no way of
temporarily switching off the offset sync function; until you reset the
offset display, the slave remains being offset.
Auto offset entry (to frame accurate only)
You can capture the current difference between the master and slave
time code numbers and put it into the offset memory on the fly.
Without the RM-D800
1 Press DISPLAY to switch the display to its DIFF mode.
2 At the desired moment, hold the W or A key and press the other.
The display looks like this:
cil
il
m7
rr
Ce
Lo
rl
ay ae
Chapter 5 Operation | 5-33
Chapt HH
Advertisement
Table of Contents
