Table of Contents
Advertisement
Chapters
lll
5-6 Striping Time Code (With the DABK-801)
—REW
The display will switch to TC mode.
1 0 Press REW to rewind the tape to the beginning.
Vl,
a
11 Press PLAY to reproduce the time code just recorded.
Copying time code as well as audio from external units
Avoid copying time code from analog machines, or unstable
synchronization will result. To copy audio from an analog machine,
first stripe the tape you want to copy to by using the internal generator
(see above), then let the PCM-800 record in synchronization with the
analog machine.
Refer to "5-7 Syncing with the PCM-800 as Slave" on page 5-30.
(1) Dubbing time code and audio from VTRs
RM-D800
sy ----- PCM-800/DABK-801
INPUTS
Sync Generator
First, make sure the PCM-800 and your VTR are both turned off.
For connections, see also page 3-6.
1 Connect the time code from the VTR to the TIME CODE IN
connector of the PCM-800.
2 Connect composite video signals from your sync or pattern
generator (or from the VTR if you are not using those geneatoors)
into the VIDEO IN connector of the DABK-801.
5-22
Chapter 5 Operation
Advertisement
Table of Contents
