GE Voluson S6 Basic User Manual page 657

CF window size:
Baseline shift:
Inversion of color direction: yes
Wall Motion Filter:
Smoothing Filter:
Gain control:
Line Density (color line
density):
Ensemble
(color shots per line):
Flow Resolution:
Pulse repetition frequency: CF: 150 Hz to 20.5 kHz
CF Map:
Frequency range:
Balance:
Max. meas. velocity:
Min. meas. velocity:
Scale:
Automatic moving tissue
suppression:
16.10.5 Power-Doppler
Screen formats:
Display modes:
PD coding steps:
PD window size:
Display mode:
Wall motion Filter:
Smoothing Filter:
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
V-P (velocity + power)
T (turbulence)
P-T (power + turbulence)
axial: 0 to B scan range
lateral: 0 to B scan range
17 steps (independent from spectral Doppler)
8 steps (low1, low2, mid1, mid2, high1, high2, max1, max2)
12 steps rising time
12 steps falling time
+15dB to -15dB, 0.2dB steps
10 steps
CF: 7 to 31
MCF: 8 to 16
4 steps (low, mid1, mid2, high)
MCF: 150 Hz to 20.5 kHz
8 Color maps can be selected
1 to 16 MHz depending on the probe, adjustable in 3 steps (low, mid, high)
from 25 to 225
4.23 m/sec
0.3 cm/sec
kHz, cm/s, m/s
yes
2D+PD (single, dual, quad)
Simultaneous dual mode: 2D/2D+PD
Triplex mode: 2D+PD/PW
Volume Mode: 3D+PD;
256 color steps
lateral: maximum to minimum B mode scan angle
axial: B-scan range
P (power)
8 steps (low1, low2, mid1, mid2, high1, high2, max1, max2)
rising edge: 12 steps
Technical Data / Information
16-19