GE Voluson S6 Basic User Manual page 231

Note
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
The green point on the probe marker indicates the rotation of the probe (like Voluson® S6/S8-
Logo on 2D image).
Select this key to display the body pattern from front. The body
pattern can be rotated in steps of 45˚.
Select this key to display the body pattern from behind. The body
pattern can be rotated in steps of 45˚ .
Select this key to display the body pattern from top view. The body
pattern cannot be rotated.
Select this key to display the body pattern from bottom view. The
body pattern cannot be rotated.
Press the upper trackball key to change between "Scan" and "No Function" or
vice versa. If "Scan " is selected, use the trackball to place the probe marker
on the body pattern. The right trackball key has the same function as the
[Activate] key
.
Use the [Probe Rotation] control to rotate the probe marker on body pattern.
Tilt the Probe on body pattern using this control. Two tilt angles are available: 45˚ and 90˚.
Select the [Activate] key on the menu area to activate settings or changes.
Select the [Activate] key on the menu area to activate settings or changes. The 3D/4D Menu is
active and orientation markers are displayed in 3D/4D mode.
The Orientation marks appear on the Rotation Axis in the A-, B-, and C-Plane. They change
according to the rotation of the slices.
Volume Mode
9-13