Advertisement
13.2.3.2 User Settings
Steering Angle:
Overview Window:
User programs:
3D/4D programs
Text auto:
Trackball Speed:
Dialog color Level:
Menu Brightness:
Doppler 2D
Refresh:
Doppler 2D
Refresh:
Use 2D Color for
STIC:
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
If the selected probe supports steering the possible angles are displayed. If the
selected probe does not support steering, the input field remains gray (disabled).
Position:
Off, Left Top, Left Bottom (default), Right Top or Right Bottom
Size:
Large, normal (default) or small
review: To Save a User Program
20 )
review: To Save a 3D/4D Program
21 )
review: To Enter/Overwrite Text Auto
page 13-22 )
review: To Adjust the Trackball Speed
page 13-24 )
Select the desired color level for the dialogs of the user interface (e.g. System Setup,
Worksheet, Patient Information, ....)
Following selection are possible: Brightest, Bright, Standard (Light Text), Standard
(Dark Text), Dark (Default), Darkest
The brightness of the menu (operating) area can be selected. From 0% to 90%
Activates the frozen 2D image in Doppler Mode during movement of the trackball
Checked - In PW mode the 2D scan is updated each time the gate is moved.
Not checked - In PW mode the 2D scan is not updated at all.
If "Use 2D Color for STIC " is selected (check mark visible), the system uses the 2D
color settings for STIC color.
If this box is unchecked, the system uses the color settings from the STIC user
programs.
Utilities and System Setup
(chapter 'To Save a User Program' on page 13-
(chapter 'To Save a 3D/4D Program' on page 13-
(chapter 'To Enter/Overwrite Text Auto' on
(chapter 'To Adjust the Trackball Speed' on
13-19
Hide quick links:
Advertisement
Chapters
