GE Voluson S6 Basic User Manual page 293

9.4.4.1.2 Transparency in Gray Render Mode
9.4.4.2 Color Render Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Application: With this function small echoes or noise is removed, to have a "clear sight" from
the start border of the render box to the desired Surface.
small number = low transparency A higher number makes the gray scale information more
transparent.
In Color Rendering color information of Color or Power-Doppler signal is used for the 3D
display.
Activate [Color] - Rendering mode (if not active).
Select the render algorithm desired:
Surface Mode:
Light Mode: Light:
Maximum Mode:
Application:
X-Ray Mode:
The following Rendering combinations are possible:
•
Surface + Light
•
Surface + Maximum
•
Surface + X-Ray
The software module allows selection from 2 modes which are simultaneously calculated.
Modes can be selected without restriction, except with the Light mode which combines only
with Surface display. Always select 2 modes!
Surface-display of color information of blood flows
A surface will be displayed in "light" mode. Structures close to
viewer are displayed bright; structures distant to the viewer are
darker.
The maximum gray values of the ROI are displayed.
Representation of all vessels in the ROI. 3D impression can be
improved by a Rotation Cine.
All color values in the ROI are used for the calculation and are
averaged (impression will be an X-Ray image)
Volume Mode
9-75