GE Voluson S6 Basic User Manual page 187

Note
8.2.3.1 View Modes
8.2.4 CW + 2D + Color Information (Triplex Mode)
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Press the control [S Sub]. The CW Submenu appears.
Changes are only possible in scan mode! However, changes of the Gray Chroma Map, the
angle and the baseline are also possible in freeze mode.
The following functions are available:
•
'CF Map and Display Mode' on page 8‐18
•
on page 8-36
'Frequency'
•
on page 8-34
'Flow Resolution'
•
on page 8-39
'Scale'
•
on page 8-32
'Balance'
•
on page 8-39
'Smoothing'
•
on page 8-33
'Ensemble'
•
on page 8-37
'Line Density'
•
'Artifact Suppression'
•
on page 8-33
'Baseline'
•
'Line Filter' on page 8-38
•
'Utilities' on page 13-2 and 'Gray Map' on page 6-22
See 'View Modes' on page 7‐25 for more information.
Triplex Mode is the simultaneous real-time display of 2D mode, Spectral Doppler and Color
Doppler.
There are two possibilities to combine Continuous Wave Doppler (CW) with Color Information:
1. CW + 2D Mode + Color Mode (CFM)
on page 8-32
Doppler Modes
8-11