GE Voluson S6 Basic User Manual page 107

5.2.2 Biopsy Setup
Note
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
H40432LC for Linear Array Transducer 12L-RS
Press the needle guide onto the
transducer shaft and push it
forward until the small swelling of
the needle guide catches in the
notch at the transducer tip.
H4906BK for Linear Array Transducer 9L-RS
Press the needle guide onto the
transducer shaft and push it
forward until the small swelling of
the needle guide catches in the
notch at the transducer tip.
H40432LJ for Linear Array Transducer ML6-15-RS*
Press the needle guide onto the
transducer shaft and push it
forward until the small swelling of
the needle guide catches in the
notch at the transducer tip.
Before starting a biopsy please make sure that in case you want to save a study, all relevant
patient information is entered.
Programming of Biopsy lines is done in the Biopsy Setup.
Single Angle and Multi Angle Biopsy lines are possible ( 'Applications' on page 5-3 )
Generally operations are done with the trackball and the left control below the control panel.
The trackball positions the Biopsy line.
Probes and Biopsies
5-13