GE Voluson S6 Basic User Manual page 497

11.5.3.1.7 First Trimester OB in application GYN
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
2. If it is desired, select "Use Report Order" (check mark visible).
3. Choose the desired measurement parameter (e.g., BPD).
4. Use [Move Up] and [Move Down].
5. To finish, click the [OK] button.
Additional study "Early Gestation" in Factory Presets in application GYN contains the same
items as study "Early Gestation" in application OB. Measure items are dependent on "table
preselection" in "Global Parameters" menu; review Global Parameters
on page 11-127 )
Parameters'
Measurements and Patient Worksheets (Reports)
(chapter 'Global
11-121