GE Voluson S6 Basic User Manual page 585

13.2.5.2.3 Network Configuration
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
As soon as the [Process Queue] button is selected, the system continues to send the data.
Show Information: With this function more information about the failed DICOM transfer can be
requested. This button is enabled if a failed DICOM transfer is selected in the Queue list and
than the following window pops up if the button is pressed:
If Image is stored in archive the additional button "Go to Archive" is available. Pressing the "Go
to Archive" button opens the archive in "Review" Mode and the failed image is shown.
Select the [Close] button to close the DICOM Transfer Queue Status window.
Select the [Network Configuration] button (in the System Setup - Network page) to perform
Network IP Address Configuration.
Before configuring the "Internet Protocol (TCP/IP) Properties", the following message appears:
Utilities and System Setup
13-39