GE Voluson S6 Basic User Manual page 495

To Display the exact Table or Equation
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Measurement Tool: If available, choose the desired Measurement Tool.
For example: Select, if the GS (Gestational Sack) is to be measured using one
Distance (value = GS diameter), or by using 3 Distances (mean value =
GS diameter)
"Selection Field": Adjust the display in the worksheet and the measure result field.
Table / Equation:
Only "user defined" tables and equations can be edited. Factory default tables and equations
can only be viewed!
1. Invoke the "Edit Measurement" window. review: To Edit a Sub Category, Study or Measure
Item (chapter 'To Edit a Sub Category, Study or Measure Item' on page 11-118 )
Measurements and Patient Worksheets (Reports)
Parameter: set check mark(s) individual or all (check mark in
"black box)
Tool Result: shows parameters to measure and items that will
be calculated
Unit: click into the line desired to change the
dimension
Precision: click into the line desired to change the precision
(# after comma)
Average: click into the line desired to change the average
display
Fetal Age: select either Table or Equation and then click
[Edit]
Fetal Growth: select either Table or Equation and then click
[Edit]
If it is desired to edit a table, click this button.
11-119