Installing The Sound Decal - Toro 31900A Operator's Manual

Figure 13
1. Cover
2. Nylock nut
3. Washer
2. Remove the nylock nut and washer from the
steering shaft.
Note:
Ensure that the foam collar remains on
the steering shaft
3. Slide the steering wheel and washer onto the
steering shaft (Figure
4. Use the nylock nut to secure the steering wheel
to the shaft. Tighten the nylock nut to 27 to 35
N∙m (20 to 26 ft-lb).
5. Mount the cover to the steering wheel
13).
4. Steering wheel
5. Foam collar
(Figure 13).
13).
(Figure
9

Installing the Sound Decal

Models 31907A and 31909A
Parts needed for this procedure:
1 Sound decal (Part 144-0512)
Procedure
For Models 31907A and 31909A, install the sound
decal (Part 144-0512) near the model year decal as
shown in Figure
Ensure that the surface is clean and dry.
g307379
1. Model year decal
2. Sound decal
17
14.
Figure 14
3. Manual tube
g353549