Replacing The Dome Light; Filling The Windshield-Wiper-Fluid Reservoir - Toro 31900A Operator's Manual

Figure 88
1. Latch-mount assembly
2. Condenser filter

Replacing the Dome Light

Note:
Refer to the Parts Catalog for the appropriate
bulb part number.
1. Use a screwdriver to remove the light lens from
the control panel.
Figure 89
1. Screwdriver
2. Bulb
2. Remove the bulb from the light base
3. Install a new bulb into the light base.
4. Install the lens into the control panel.
3. Screen cover
(Figure 89).
3. Lens
(Figure
Filling the
Windshield-Wiper-Fluid
Reservoir
Note:
The windshield-wiper-fluid reservoir is located
next to the engine on the right side of the machine.
1. Remove the cap
g032951
1. Reservoir cap
2. Fill the reservoir with wiper fluid.
3. Replace the cap on the reservoir.
g253616
89).
73
(Figure 90) on the reservoir.
Figure 90
2. Reservoir
g353836