Toro 31900A Operator's Manual page 31

lowers the attachment to the lowest position (i.e., the
O ) position.
PERATING
•
Raise the attachment: Press the rear of the
switch.
•
Lower the attachment: Press the front of the
switch.
Raise the attachment to the T
whenever you transport the machine between
locations. Lower the attachment to the O
position whenever you are not using the machine.
PTO Switch
•
Engage the PTO: Pull up on the switch.
•
Disengage the PTO: Push the switch down.
The only time you should engage the PTO is when the
PTO attachment is in the O
to the ground with the driveshaft connected) and you
are ready to begin operation.
Note:
If you leave the operator's seat while the
PTO switch is in the O
automatically shut off the engine; refer to
the PTO Function (page
Key Switch
The key switch has 3 positions: O
and S .
TART
Use the switch to start or shut off the engine [refer
to Starting the Engine (page 42)
Engine (page 43)] or to review the display-screen
information [refer to Understanding the Display-Screen
Information (page 39)].
Throttle Control
The throttle control adjusts the engine speed.
•
Increase the engine speed: Move the lever
forward or push the
switch.
•
Decrease the engine speed: Move the lever
rearward or push the
switch.
Glow-Plug Switch
Use the glow-plug switch to help start a cold engine.
Display Screen
The display screen shows information about your
machine, such as the operating status, various
diagnostics, and other information.
Refer to Understanding the Display-Screen
Information (page 39)
information.
position
RANSPORT
PERATING
position (lowered
PERATING
position, the machine will
N
Resetting
42).
, O /P
FF N REHEAT
or Shutting Off the
position on the
FORWARD
position on the
REARWARD
for more display-screen
Display Screen Button
Refer to Using the Display-Screen Button (page
,
31
39).