Yamaha FLIP-X Series Maintenance Manual page 81

9 Remove the motor.
Remove the bolts (4) securing the motor and
remove the motor.
0 Remove the wave washer and flat
washer.
c
CAUTION
When removing the motor, the flat washer might
be left in the bearing inside the motor, so use
caution.
q Pull out the rotor.
Remove the bolts (4) securing the rotor and
pull out the rotor.
w Install the new rotor.
e Install the wave washer and flat
washer.
Carefully check the wave washer and flat
washer installation order.
Install the new motor.
r
Assemble in the reverse order of
t
disassembly (Step 13 g Step 4).
Step 9
Removing the motor
53405-A5-00
53406-A5-00
53407-A5-00
Step 10
Removing the wave washer and flat washer
Step 11
Pulling out the rotor
Motor
4
Motor
Wave washer
Flat washer
Rotor
Rotor
4-7