Yamaha FLIP-X Series Maintenance Manual page 15

Hide thumbs Also See for FLIP-X Series:
Table of Contents

Advertisement

Warning label 11 (Controller)*
* This label is attached to the front panel.
c
CAUTION
Refer to the manual.
Warning label 12 (single-axis robots, Cartesian robots*)
* Some robot models
w
WARNING
If a load is applied to the motor cover, this may cause breakage.
The robot may drop at installation, causing personal injury.
Potential hazard to human body
To avoid hazard
取扱説明書参照
READ INSTRUCTION
MANUAL
Personal injury may result.
Do not hold the motor cover.
Instructions on this label
This indicates important information that you must
know and is described in the manual.
Before using the controller, be sure to read the manual
thoroughly.
When adding external safety circuits or connecting a
power supply to the controller, read the manual
carefully and make checks before beginning the work.
Connectors have an orientation. Insert each connector
in the correct direction.
Instructions on this label
• Do not transport the robot by holding the motor
cover.
93005-X0-00
90K41-001850
S-7

Advertisement

Table of Contents
loading

Table of Contents