Table of Contents
Advertisement
3.5
Apply grease to the linear guide every 3 months.
Prepare the tools necessary for the replacement work.
• Phillips screwdriver
• Grease gun
• Brush (for grease application)
2
c
CAUTION
Select a grease gun suitable for the cartridge
grease you have purchased.
•
Tip nozzle, φ10 (Inside diameter, φ7)
1
Turn off the controller power.
2
Place a sign indicating the robot is being adjusted.
Place a sign indicating the robot is being adjusted, to keep others from operating the controller or
operation panel.
Enter the safety enclosure.
3
Wipe off the contaminated grease.
4
First, wipe off the contaminated grease with a clean cloth rag wound on the stick.
c
CAUTION
Do not put your finger in the slider movement range to prevent your finger from being caught in if the slider is
moved by hand accidentally.
5
Apply the grease.
Use the grease gun to apply the grease to the grease nipple of the linear guide through the clearance
between the upper cover and frame.
2-12
B10/B14/B14H
Advertisement
Table of Contents
