Lubrication; Greasing The Machine - Toro Greensmaster 3150 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Every 50 hours (Immediately after
every washing)
Lubricate the grease fittings regularly with No. 2
lithium grease.
Locate the grease fitting as follows:
•
Rear-roller-hub assembly or, if equipped with a
3-wheel-drive kit, rear-wheel-roller clutches and
external ball bearing (1)
Figure 29
•
Steering-fork shaft (1)
•
Steering-cylinder-rod end
Figure 30
(Figure 29)
(Figure 30)
(Figure 30)
•
Lift-arm pivot (3) and pivot hinge (3)
•
Pull-frame shaft and roller (12)
g005117
•
Steering-cylinder end
g017144
31
(Figure
Figure 31
(Figure 32)
Figure 32
(Figure 33)
Figure 33
31)
g005119
g005120
g005121