Installing The Ce Decals; Reducing The Tire Pressure; Burnishing The Brakes - Toro Greensmaster 3150 Operator's Manual

8

Installing the CE Decals

Parts needed for this procedure:
1 Warning decal (Part No. 136-8505)
1 CE mark decal
1 Production year decal
Procedure
If you use this machine in a country that complies with
CE standards, perform the following steps after you
install the CE Guard Kit to the machine:
•
Apply the CE warning decal (Part No. 136-8505)
over the existing warning decal (Part No.
136-8506).
Figure 10
1. Warning decal (Part No. 136-8506)—apply CE warning
decal (Part No. 136-8505) here.
•
Apply the CE mark decal and the production year
decal near the serial plate on the footrest support
(Figure 11).
1. Serial plate
2. CE mark decal
9

Reducing the Tire Pressure

No Parts Required
Procedure
The tires are overinflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
g236139
before starting the machine; refer to
Pressure (page
10

Burnishing the Brakes

No Parts Required
Procedure
Burnish the brakes; refer to
(page 39).
14
Figure 11
3. Production year decal
Checking the Tire
37).
Burnishing the Brakes
g236138