Backlapping The Reels - Toro Greensmaster 3150 Operator's Manual

Figure 63
1. Knob (reel-speed control)
2. Handle (backlap lever)
Note:
You can increase or decrease the reel
speed to compensate for turf conditions.
g229849
g229880
3. Indicator arrow

Backlapping the Reels

WARNING
Contact with the reels or other moving parts
can result in personal injury.
• Keep your hands and clothing away from
the reels or other moving parts.
• Never attempt to turn the reels by hand or
foot while the engine is running.
1. Position the machine on a level surface, lower
the cutting units, shut off the engine, remove the
key, and set the parking brake.
2. Tilt the operator's seat forward and support it
with the prop rod
3. Make initial reel to bedknife adjustments
appropriate for honing all the cutting units that
you are backlapping; refer to the Cutting Unit
Operator's Manual.
4. Rotate the backlap lever to the R position
(Figure 65).
47
(Figure 64).
Figure 64
g229847