Table of Contents
Advertisement
If the system-level diagnostics tests...
After you finish
If the failures persist after repeating the steps, you need to replace the hardware.
ThinkSystem DM3000x and DM5000x Hardware Installation and Maintenance Guide
114
Then...
status [-dev devtype|mb|slotslotnum]
following default response is displayed:
SLDIAG: No log messages are present.
3. Exit Maintenance mode by entering the
following command:
4. Enter the following command at the
Loader prompt to boot the storage
system:
boot_ontap
You have completed system-level diagnostics.
The
halt
Advertisement
Table of Contents
