Installing The Solenoid Valve - Huawei LUNA2000-2.0MWH Series User Manual

LUNA2000-2.0MWH Series Smart String ESS
User Manual
Procedure
Step 1 Push the locking latch leftward.
Step 2 Pull out the handle.
Step 3 Gently push the PSU into its slot along the guide rails.
Step 4 Push the handle upward.
Step 5 Push the locking latch rightward to lock the handle.
Figure 7-2 Installing the PSU
----End

7.2 Installing the Solenoid Valve

If a solenoid valve is configured with a reset device, ensure that the solenoid valve
is not activated before installing it on the fire cylinder. For details, see ''FAQ''.
Issue 08 (2022-11-15)
Figure 7-1 PSU installation position
CA UTION
Copyright © Huawei Technologies Co., Ltd.
7 Powering On the System
141