LUNA2000-2.0MWH Series Smart String ESS
User Manual
●
Step 3 Connecting ground cables: Determine whether the socket ground cables are
routed in from the top or bottom.
●
Issue 08 (2022-11-15)
Figure 5-3 Connecting live wires and neutral wires
(1) 110 V switch installing position
Installing a 220 V socket
–
Connect the live wires (corresponding to cables 1757) and neutral wires
(corresponding to cables 1760) from the lower end of the terminal block
to the socket.
NO TE
Step 4 applies to the scenarios where a 220 V or 110 V socket is installed. The following
figure uses a 220 V socket as an example.
If cables are routed in from the top of the socket, the cables (1761) are
connected to the ground points. Remove the other end of the cables from the
rear panel and connect them to the ground points of the socket.
Copyright © Huawei Technologies Co., Ltd.
5 Installing Cables
115