Huawei LUNA2000-2.0MWH Series User Manual page 27

Smart string ess
Hide thumbs Also See for LUNA2000-2.0MWH Series:
Table of Contents

Advertisement

LUNA2000-2.0MWH Series Smart String ESS
User Manual
Charge Requirements
Battery Pack Installation Requirements
Battery Pack Short Circuit Protection
Battery pack short circuits can generate high instantaneous currents and release a
great amount of energy, which may cause equipment damage or personal injury.
Issue 08 (2022-11-15)
Do not use damaged battery packs (dented on the enclosure or other
damage). Damaged battery packs may cause the release of flammable gases.
Do not store damaged battery packs near undamaged products.
Do not store damaged battery packs with flammable materials. Keep non-
professionals away from the storage area.
Monitor damaged battery packs during storage for signs of smoke, flame,
electrolyte leakage, or heat.
If a battery pack has not been charged for more than eight months, charge
the battery pack again. Otherwise, the battery pack performance and service
life may be affected.
You can obtain the battery pack production completion time by querying the
delivery record based on the battery pack SN or consulting the Company's
service engineers.
NO TE
Before installing battery packs, check whether the battery packs are abnormal. A battery
pack is deemed abnormal when any of the following symptoms occurs:
The enclosure of the battery pack is obviously deformed or damaged.
The voltage between the positive and negative electrodes of the battery pack is far
below the specified range.
Use battery packs of specified models. Using battery packs of other models
may cause damage.
Before installing battery packs, check whether the packaging is intact. Do not
use battery packs with damaged packaging.
Place and secure battery packs horizontally.
When installing battery packs, do not place installation tools or other objects
on the battery packs.
During installation, ensure that the positive and negative electrodes of battery
packs are not short-circuited.
During installation, ensure that the terminals are tightened properly using a
torque wrench and check them regularly.
D ANGER
When installing and maintaining battery packs, wrap the exposed cable
terminals on the battery packs with insulation tape.
Avoid foreign objects (such as conductive objects, screws, and liquids) from
entering battery packs, as this may cause short circuits.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents