Huawei LUNA2000-2.0MWH Series User Manual page 259

LUNA2000-2.0MWH Series Smart String ESS
User Manual
Figure D-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
----End
Paint Supply Information
Table D-1 Painting requirements
Item
Primer thickness
Intermediate coat thickness
Top coat thickness
Primer type
Intermediate coat type
Color number of the top coat
Issue 08 (2022-11-15)
NO TE
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color difference (Δ
equal to 3. If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should also be free of bulges,
scratches, peeling, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
NO TE
The following paint model list provided by Huawei is subject to change and for reference
only. The price of paint and technical services are subject to local pricing.
Copyright © Huawei Technologies Co., Ltd.
D Repainting the Equipment
), which should be less than or
E
Specification
60 μm
120 μm
60 μm
Epoxy zinc rich paint
Zinc-rich paint
Obtain the color number based on the
color palette included with the
equipment.
249