Commissioning Using Deployment Wizard - Huawei LUNA2000-2.0MWH Series User Manual

LUNA2000-2.0MWH Series Smart String ESS
User Manual
4.
5.
----End
Follow-up Procedure
If any page is blank or a menu cannot be accessed after you log in to the WebUI,
clear the cache, refresh the page, or log in again.

8.2 Commissioning Using Deployment Wizard

Procedure
Step 1 Log in as admin to access the deployment wizard page.
Step 2 Set corresponding parameters as prompted. For details, see Help on the page.
Issue 08 (2022-11-15)
If...
On the login page,
the User Name is
admin by default.
On the login page,
the User Name is
empty by default.
NO TE
– Update the SmartLogger software as required.
– Protect the password by changing it periodically, and keep it secure. If you lose the
password, the device must be restored to its factory settings. Huawei will not be
held liable for any losses resulting from improper password management.
– You will be locked out for 10 minutes after five failed password attempts in five
minutes.
– A dialog box with recent login information is displayed after login. Click OK.
Choose Monitoring > Logger(Local) > About to view the SmartLogger
software version and check whether software upgrade is needed.
(Optional) To upgrade the SmartLogger software version, contact the
Company's engineers to obtain the upgrade package and guide and complete
the upgrade accordingly.
NO TE
● After the software upgrade is complete, the SmartLogger automatically restarts. Log in
to the SmartLogger WebUI again 3 minutes later.
● If the SmartLogger is upgraded from V300R001C00, the original admin user becomes
an advanced user, and the login password remains unchanged. If administrator rights
are required, log in to the SmartLogger as the installer user. The password is the same
as that for logging in to the mobile app (the initial password is 00000a).
Copyright © Huawei Technologies Co., Ltd.
8 SmartLogger Web-based Deployment
Then...
1. Enter the initial password Changeme in the
Password and click Log In.
2. Change the initial password as prompted and use
the admin user name and new password to log in
again.
Select installer in the User Name, set the login
password as prompted, and click Log In.
160