LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
Step 4 Use firestop putty to seal the cable holes at the bottom.
Step 5 Install the removed cover.
----End
5.4 Installing AC Input Power Cables
Prerequisites
●
●
●
Procedure
Step 1 Remove the protective cover.
Figure 5-8 Removing the protective cover
Step 2 Remove the baffle plates for the AC input power cables.
Issue 02 (2021-11-15)
The ESS is not powered on.
AC input power cables have been pre-buried.
The OT/DT terminals of the AC input power cables have been crimped. For
details, see
B Crimping an OT or DT
Copyright © Huawei Technologies Co., Ltd.
Terminal.
5 Installing Cables
94