LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
4.3 Installing Components
4.3.1 Installing the PSU
Prerequisites
●
●
●
●
Procedure
Step 1 Push the locking latch leftward.
Step 2 Pull out the handle.
Step 3 Gently push the PSU into its slot along the guide rails.
Step 4 Push the handle upward.
Step 5 Push the locking latch rightward to lock the handle.
Issue 02 (2021-11-15)
If the PSU is damaged, contact the local office.
Do not put your hands into the PSU slot to avoid electric shock.
When the PSU is running, a high temperature is generated around the air
outlet at the rear. Do not touch the PSU or place cables or other objects on it.
Determine the PSU installation position.
CA UTION
In an outdoor scenario, power on the PSU within 24 hours after unpacking.
Otherwise, place it in a dry indoor environment without corrosive gas.
Figure 4-10 PSU installation position
Copyright © Huawei Technologies Co., Ltd.
4 Installation
80