Huawei LUNA2000-2.0MWH-1H0 User Manual page 110

LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
Figure 5-21 Removing a fastener
Step 5 Connect one end of the optical jumper to the fiber adapter.
Step 6 Route the other end of the optical jumper through the cable hole on the side of
the ATB, and connect the cable to the ATB.
Step 7 Connect the peripheral optical cable to the ATB, splice the optical cable and the
optical jumper, and wind the spliced cable around the fiber spool on the ATB.
Step 8 Install an optical module on the CMU panel, connect one end of the optical
jumper to the optical module, and connect the other end to the fiber adapter.
Only professionals are allowed to splice fibers.
Figure 5-22 Optical cable positions at the bottom
(1) DC power cable
hole
Issue 02 (2021-11-15)
NO TICE
(2) AC input power
cable or ground cable
hole
Copyright © Huawei Technologies Co., Ltd.
(3) Optical cable or FE
communications cable
hole
5 Installing Cables
(4) UPS or RS485 cable
hole (reserved)
102