Personnel Requirements - Huawei LUNA2000-2.0MWH-1H0 User Manual

LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
●
●
●
●
●
●
●
●
●
●
●
Personal safety
●
●
●
●

1.2 Personnel Requirements

●
Issue 02 (2021-11-15)
Keep irrelevant people away from the equipment. Only operators are allowed
to access the equipment.
Use insulated tools or tools with insulated handles.
All cable holes should be sealed. Seal the used cable holes with firestop putty.
Do not obscure, damage, or block any warning labels on the equipment.
When installing the equipment, use a torque wrench with a proper range to
tighten the screws according to the instructions.
Ensure that power is off during installation.
Repaint any scratched surfaces caused during equipment transportation or
installation in a timely manner. Scratched equipment should not be exposed
to an outdoor environment for extended periods.
Secure the device to the ground or other stable objects before operation.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not change the structure or installation sequence of equipment without
permission.
Do not touch a running fan with your fingers, components, screws, tools, or
boards before the fan is powered off or stops running.
If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
Use tools correctly to prevent personal injury or equipment damage.
Do not touch the energized equipment, as the enclosure is hot.
Do not power on the equipment before it is installed or confirmed by
professionals.
Understand the composition and working principles of the ESS as well as
relevant local standards.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
3