Fault Messages - ABB ACS560 Quick Installation And Start-Up Manual

Fault messages

Code Fault / Aux.
(hex) code aux code
visible only on
assistant con-
trol panel and
drive com-
poser))
1080 Backup/Restore
timeout
1081 Rating ID fault
2281 Calibration
Cause
During backup/restore,
communication is lost
between panel/PC tool
and drive.
Drive software is not able
to read the drive rating ID.
Measured offset of output
phase current measure-
ment or difference
between output phase U2
and W2 current measure-
ment is too great (the val-
ues are updated during
current calibration).
Diagnostics 153
What to do
Request backup or restore again.
Reset the fault or cycle the power
to the drive.
If the fault persists, contact your
local ABB representative.
Try performing the current calibra-
tion again.
If the fault persists, contact your
local ABB representative.
EN
HI