ABB ACS560 Quick Installation And Start-Up Manual page 187

6.
7. Prepare the ends of the input power cable and motor cable as illustrated in the
figure. If you use aluminum cables, put grease on the peeled aluminum cable before
connecting it to the drive. Two different motor cable types are shown in the figures
(7a, 7b).
[ Translation missing]
pigtail made from the shield as a PE conductor with yellow-and-green color.
6
7b
8. - (
9. :
• Ground the shield 360° under the grounding clamps.
• (9a)
• T1/U, T2/V T3/W
R8:
• ,
•
The bare shield is grounded 360°. Mark the
7a
7b
PE
)
(9b)
,
HI -त् व रित इं स ् ट ाले श न और स् ट ार् ट -अप गाइड 187
7a
PE
EN
HI