ABB RMC-100 User Manual page 81

applications, as in Table
add other applications.
This procedure assigns one of the unassigned annunciators to one of the measurement applications
instances, AGA3-1.
IMPORTANT NOTE: Assign up to eight annunciators to the applications. An application must be
instantiated before assignment. If there are not enough available annunciators, reassign default
ones, as necessary.
Figure 5-11: Default annunciator assignments
To assign the applications to an annunciator:
1. Click Display on the navigation tree.
Click Annunciators. The current annunciator assignments display
2.
5-2. Keep or change those assignments; or use unassigned annunciators to
(Figure 5-12).
21 05 55 2MN A E | RM C-1 00 | 8 1