Connect Tfio Modules - ABB RMC-100 User Manual

Figure 3-11: Connect RMC to other ABB devices
Host
system
Host
with
System
PCCU
Never connect Ethernet 1 and Ethernet 2 to the same Ethernet switch
ports to the same switch disables both ports.
Figure 3-12: Wrong Ethernet connection
10/100 BaseT
Ethernet switch or hub
3.6.2

Connect TFIO modules

The RMC has two TFIO ports. Each port requires a TFIO installation kit that includes the cable to
connect the TFIO modules to the RMC. For additional information, refer to the TFIO Module User
Manual under Additional information.
TCP/IP
network
Ethernet 1
Ethernet 2
10/100 BaseT
Ethernet switch or hub
DO NOT SET UP THIS CONNECTION
Ethernet 1
Ethernet 2
Do not connect Ethernet 1 and Ethernet 2
ports to the same Ethernet switch or hub
Other ABB devices such as
XFC, XRC, and NGC
(Figure 3-12). Connecting both
21 05 55 2MN A E | RM C-1 00 | 3 9