Pulse Input Configuration - ABB RMC-100 User Manual

Figure 4-30: Digital input and output configuration
3. Select the Type from the drop-down list (Digital Input is the default).
4. Configure each Digital I/O:
Digital input mode: select the low and high threshold voltage.
•
Digital output mode: select the current value and the initial value.
•
Click Send.
5.
4.9.5

Pulse input configuration

Each pulse input has a debounce filter. Without debounce, the PI operates at a frequency range of 0
to 20 kHz. With debounce the frequency range is 1 to 550 Hz.
To configure the pulse input:
1. Click I/O System on the navigation tree.
2. Click Pulse Inputs
Figure 4-31: Pulse input configuration
3. Click the Value field for PI 1 or PI 2 under Debounce and select On from the drop-down list.
(Figure 4-31).
21 05 55 2MN A E | RM C-1 00 | 6 9