Edit The Security File - ABB RMC-100 User Manual

Figure 6-5: Security Editor screen
2. Create the RBAC first:
a. Verify that Role displays Administrator.
Click Add User.
b.
c. Type the user name into Name.
d. Type the password into Password.
Click OK.
e.
3. Follow the procedures detailed in section
accounts with standard roles. Then proceed to Step 4.
4. To define or customize a role, see section
complete.
5. To assign RBAC security to a communication port, see section
authentication on communication ports.
6. Type a description of the security file into Description.
7. Click Save As to save the new security control file.
8. Type a password for the security file and click OK. The Save Security File dialog displays.
9. Navigate to the appropriate folder, then rename the file as necessary. Click Save.
IMPORTANT NOTE: The Security Key displays at the top right corner of the Security Editor dialog.
This key displays "n/a will be generated on save" before the security file is saved for the first time,
or after changes. After saving, a new security key is assigned and logged into the Security Log. A
copy of the security file is saved to the PC connected to the device. The previous key disappears
after any modification, and a new one replaces it. The new key and the security control file are
automatically logged and saved to the PC. The security control file saves to the PCCU > RBAC
folder on the PC and has a default file name tfsrf.rba.
6.6.3

Edit the security file

To edit an existing security control file:
1. Display the Security Editor dialog.
2. Click Open to display the Open Security File navigation dialog.
Browse to PCCU > RBAC > [file name.rba]. Click Open.
3.
6.6.4 Create a new user account to create user
6.6.4 Create a new user account. Return here when
6.6.5
21 05 55 2MN A E | RM C-1 00 | 1 0 5
Enable RBAC