Engineering Labels For User Cables - Huawei AP4030DN Hardware Installation And Maintenance Manual

Huawei AP4030DN
Hardware Installation and Maintenance Guide


The serial number on the hub, the network interface number of the agent or terminal, and the
location of the stand-alone device should be specified according to actual connections.
Label Example
Figure 5-91
Figure 5-91 Example of the label on network cables
A01
Meaning of the label in



5.4.4 Engineering Labels for User Cables

Attach labels to both ends of the cable to indicate the locations of the cable on the device and
MDF.
Meaning of the Engineering Labels for User Cables
Table 5-25
Table 5-25 Contents of the engineering labels for user cables
Content
MN-B-C-D
Issue 02 (2015-05-18)
For a network cable connecting a hub and an agent or terminal, the label on the agent or
terminal end should contain the serial number of the network interface. The definitions
of the cabinet number and chassis number are the same as those described in
If the hub is a stand-alone device without cabinet or chassis, the label should contain
specific location information that identifies the hub.
shows the label on the cable.
03 01 01
Figure
"A01-03-01-01" indicates that one end of the network cable is connected to network
interface 01 of slot 01, chassis 03 of the cabinet on row A, column 01 in the equipment
room.
"B02-03-01" indicates that another end of the network cable is connected to network
interface 01, chassis 03 of the cabinet on row B, column 02 in the equipment room. No
slot number is given.
shows the contents of the labels.
Meaning
MN: cabinet
number
B: frame number
C: physical slot
number
D: cable number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-91.
Example
For example, A01 is the first cabinet in row A.
Numbered in the bottom-up order with two digits,
for example, 03.
Numbered with two digits in the top-down and
left-right order. For example, 01.
Numbered with two digits in the top-down and
5 Appendix
Table 5-24.
91