Huawei AP4030DN Hardware Installation And Maintenance Manual page 64

Hide thumbs Also See for AP4030DN:

Table of Contents

Huawei AP4030DN

Hardware Installation and Maintenance Guide

Figure 5-65 Disassembling an LC fiber connector

----End

Installing the SC Fiber Connector

Procedure

Step 1 Remove the dustproof cap of the SC fiber connector and store it for future use.

Step 2 Align the core pin of the male connector with that of the female connector, as shown in

5-66.

Figure 5-66 Aligning the male connector with the female connector

Step 3 Feed the fiber connector into the female connector, with your fingers holding the shell of the

fiber connector (not the pigtail). When you hear a click, the fiber connector is secured by the

clips (internal parts, not illustrated in the figure). Pull the fiber connector gently. If the

connector does not loosen, the installation is complete. See

Issue 02 (2015-05-18)

Huawei Proprietary and Confidential

5 Appendix

Figure

5-67.

Figure

Table of Contents